My scope is already hanging off the back of the rail about a half inch. Is there some type of rail extension i could mount to the existing rail to move the scope back further and also lower it a half inch or so? I found some that would extend it back but would also raise it higher and I definitely dont wand to do that, lower would be better.
Offset ring mount such as: Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount 30 mm Diameter, t's on Amazon for under $ 30. ATN sells one for around $100 that is a quick detach so you can move it from gun to gun.
I've purchased two of these (one from this seller and another from another seller) in the last couple of years. They are well made and I've not had any issues with the 5x20 mounted on a 7.62x51mm Rem 700, and the 3x14 mounted on a .17WSM:
Post by mexicanjoe on Nov 26, 2019 19:56:44 GMT -8
IMHO The ATN is made for an AR platform. I had my XS2 on my Ruger American in 6.5 Cre and it was not comfortable. I had to stretch to get my eye on it. The BC was amazing as I was taking farther shots and hitting but the hold was difficult and uncomfortable. You have to get your eye on the boot to work properly.
So I moved it or an AR platform in a 300BO. I mainly hunt hogs with it. Less recoil, faster 2nd, 3rd and so on acquisition and the eye relief is perfect.
I ended up putting a Vortex Diamond Back Tactical on the 6.5 and enjoy both much more. Now I am learning long range shots during the day. With my reloading it is getting g really fun and crazy accurate. Learning my clicks and MOA is exciting as it progresses.
I take both with me when I go hunt (from my truck bed). So weight is not an issue. Now I have choices depending on my location and set up. If I am under 200 it’s the ATN/AR. If it’s 250 it’s the Ruger and I can go for 2fers. Another fun challenge.
I love my ATN but it’s not a do all for every application.
My typical deer hunts are <100 yards. So the ATN/AR is great and I get to record the hunt (day time). If they don’t come in I hang out and move to NV and wait for Miss Piggy.
The idea is to have fun and fill freezers. Not be a Ninja Hunter.
Last Edit: Nov 26, 2019 19:57:34 GMT -8 by mexicanjoe
iggs: I now have the ABL fitted and noticed if fouls the line of the IR torch, is there another mount available you move the it torch clear on my x sight ii?
Mar 7, 2021 13:42:08 GMT -8
hotdaugh: I am new here, been an ATN owner for about a year now... been shooting for, well, a really long time (~ 50 years)
Mar 21, 2021 13:41:21 GMT -8
hotdaugh: My ATN scope rings do not seat in my weaver rail? anyone else have this problem?
Mar 21, 2021 13:51:56 GMT -8
warren: hotdaugh Had the same. Had to get a Picatinny rail for my mossberg MVP. Fits 100% securely now.
Mar 23, 2021 12:54:54 GMT -8
bowhunterdan: Howdy- I just got the 4K and tried to get the firmware update and it wants me to do a factory reset. I am reluctant. Does anyone know what the newest firmware number is for the 4K pro? The one showing on mine is 22.214.171.1243
Mar 24, 2021 18:08:19 GMT -8
telo: just opened my brand new Mars 4. Tried putting sod card in but lost it in the scope somewhere. Tried several new cards but keep getting ‘no memory card’ message. Anyone help or do I need to send it back?
Mar 25, 2021 23:07:12 GMT -8
doitrightkid: Hi folks how can I get inside my x-sight HD 3-12x scope I tried but can't get into it the unit was dropped on a hunt & got water in it so 1 of the battery contacts is now stuck won't spring or come loose any assistance is helpful service says its too old
Mar 28, 2021 11:44:41 GMT -8
bill4: 'm inquiring about the ATN X sight 4k pro. Specifically the one shot zero feature. 4:16 PM When adjustment is needed to zero the rifle and you change the reticle position, what is the value for each click? I'm currently using the MIL ranging type reticle o
Mar 29, 2021 12:34:18 GMT -8
ming: How can I use the microsd card to update the Sight 4K 5-20?
Apr 4, 2021 6:16:31 GMT -8
tmcraig008: ming the new way is so much easier. just plug it into your pc and use the software
Apr 7, 2021 6:02:33 GMT -8
jpfino: Does anyone know where I can get my X-Sight II HD repaired? It stopped working and ATN no longer does service for this model.
Apr 13, 2021 23:06:11 GMT -8
oldcoot: My IR850 That came with my X sight 4K Pro discharges batteries when turned off. If I leave batteries in the unit for just a few weeks, they are completely discharged (0.8V). Anyone else have this issue. All else has been great - love the unit.
Apr 16, 2021 17:46:12 GMT -8
neil: Newbee. Hi everyone I am new in every way, new to air gunning and the ATN. I Have a BSA R10 SE which I love and just ordered a BSA ULTRA CLX which due to Covid is delayed. Due to being an old git I am trying to get my head around using my new X sight 2,
Apr 17, 2021 7:38:57 GMT -8
majordanarcav: Freezing screens, unresponsive buttons, firmware updates don't download. about 1/2 of the features don't work. Do your due diligence before wasting your money on this gimicky piece of crap.
Apr 30, 2021 15:21:52 GMT -8
maersk7: New to the Forum... New to ATN. Received x-sight 4k pro & new MicroSD card. Bought 128gb. ATN sent me a 64bg. Had some problems getting it to recognize, but Cust Serv helped with that. Turned it off. This morning turned it back on - no HUD. WTH?
May 1, 2021 6:15:49 GMT -8
kirsfr: Firmware Update x-sight pro 3-14 nach Anleitung durchgeführt, Gerät lässt sich nicht mehr einschalten
May 5, 2021 3:36:42 GMT -8
kirsfr: Windows 10 erkennt x-sight pro nicht??
May 5, 2021 4:08:33 GMT -8
nails: Hi all, just would like to know what the current firmware is, I have 126.96.36.1993...I've done the win10 usb update, but stage 2 failed as my device X sight 4k doesn't come up, the device list is empty but everything seems to work anyway
May 7, 2021 11:21:19 GMT -8