Post by havockchylde on Aug 31, 2019 19:16:42 GMT -8
New user here. I'm hoping I chose the correct location to post this. Here's my issue: I was sighting in the scope today and noticed I was having some ghosting issues when performing the NUC. After getting everything done, I was checking the scope out at night to see if the ghosting continued. Unfortunately, the ghosting is still happening. The ghost image will occur when either starting the unit up or performing the NUC IF there is anything in the field of view that has a temperature difference. So, steps I've taken so far are 1) Updated firmware per instructions from ATN 2) Multiple power cycles on and off obviously 3) Attached the external power supply that's directly from ATN itself just in case the battery has started to fail. Currently, the only work around I've found is to drape a microfiber cloth over the end of the scope so there is a uniform temperature that provides no possible image to leave on the screen. Once I do that, the scope has a wonderfully clear image. This just started today after sighting it in. I took a screen shot to see if it was the screen itself or something else. Hopefully the attached image can be seen. Just wondering if anybody else has any idea what may be happening or have any other ideas. I sent an e-mail to ATN, but it'll be a few days before I hear back I'm assuming.
Post by turkeytracks on Oct 13, 2019 11:10:12 GMT -8
I had the same problem with my 384 4.5-18. I use my hand to cover the lense when performing a manual nuc because I don’t believe it has an automatic shutter. My 640 has an automatic shutter and you can hear the shutter clicking (opening and closing) when performing a nuc
lakehouse: Have BinoX 4K and when screen froze while watching I had to reset by holding down power and enter for several seconds and all returned to normal except now the laser finder will not come up. Waiting on reply from ATN meanwhile can anyone help?
Jan 22, 2020 7:11:50 GMT -8
dustyroads: WalMart salesman got me the right SD card so I need instructions for detailed downloding firmware via my laptop to the SD than installing to Thor HD
Jan 23, 2020 9:50:29 GMT -8
trombley: where do I register my binox-hd 4-16x?
Jan 23, 2020 10:29:58 GMT -8
dustyroads: OK-thank you ATN for the YouTube SD updating video👍
Jan 23, 2020 11:58:57 GMT -8
reno: I'm a newbe to both this list and to night vision scopes. I purchased a X-Sight 2 3-14 and am having issues with connecting it thru WiFi to my iPhone which is my hot spot. Bluetooth works but only gives me access to the settings and environment. Any help?
Jan 31, 2020 4:02:27 GMT -8
tupelojim: In respose to "reno" I believe you need to have the "Obsidian" not "obsidian4" app installed on your phone to connect x-sight 2 to you phone!
Feb 1, 2020 7:57:48 GMT -8
poncho: Hello everyone
Feb 1, 2020 16:47:27 GMT -8
richy: can aanyone advise me how to upload a bio upgrade to my 4-k Pro from my macbook using the supplied cord?
Feb 3, 2020 12:10:42 GMT -8
reno: Looking to change or edit the list of targets on my X-Sight 2 under the range finder, anyway to export to card?
Feb 5, 2020 6:02:56 GMT -8
ldb7: Got new xsight pro 3-14 yesterday and needing help. Charged it for a few hours out of the box. Inserted mini sd 64 gb (formatting by SanDisk). ATN agreed to install newest firmware prior to shipping. Turns on, but freezes up in few seconds
Feb 7, 2020 9:56:11 GMT -8
ldb7: I waited on hold with ATN for 30 min then left my number to call back. They called me back after about an hour. We immediately got disconnected and they DIDNT CALL ME BACK! 😡
Feb 7, 2020 10:00:32 GMT -8
zelda: I have a Samsung Galaxy Note 9 will not connect to my 4K Pro 5x25 Scope. I have already sent it in to ATN once and nothing changed when I got it back. I have tried everything. But it connect to my wife's iPhone.
Feb 9, 2020 16:15:14 GMT -8
pcrocker243: hello fellow ATN owners. Have been using ATN thor 4 284 7x28 since Dec 2019. Absolutely love the scope. Today I cannot get the scope to power on. The battery is charged up. After holding the power button for 30 sec, the scope still will not power on. This
Feb 11, 2020 3:23:45 GMT -8
pcrocker243: Anyone experienced black screen on ATN thor 4?
Feb 11, 2020 4:30:28 GMT -8
teajay: Hi, i have a ATN x sight 2, and is there any chance of getting the smart reticle for this model??
Feb 11, 2020 6:47:08 GMT -8
7192042: I have called them three days in a row and left my call back number. They have never called me back. My Thor4 has not been used hardly at all. It worked fine then next night it would not come on. I have tried loading new firmware, but same wont come on.
Feb 11, 2020 20:38:50 GMT -8
odin: Without stating the obvious, have you tried charging it? Maybe it was not shut down correctly the night before or charger not connected correctly
Feb 12, 2020 0:43:09 GMT -8
7192042: I finally got ahold of ATN, He told me to buy a new cord and try that before sending it back. The new firmware loaded and my thermal is working again. I will put back on gun and try it hunting a few hours. I hope this might help some other ATN owners.
Feb 12, 2020 18:55:36 GMT -8
dustyroads: Ha Ha Ha....Gotta Binox HD refurbed on ATN sight couldn't get to see anything-all black...left lens cover on!!!!
Feb 16, 2020 2:59:29 GMT -8
day1skimmer: I'm a verified skimmer which as been into skimming for the past 10 years now. I've got new and fresh updates dumps with pin and without pin. I got lot of buyers purchase bulks daily of my pcs i know what I'm trying to say becoz my pcs really hitting high a
Feb 17, 2020 20:47:53 GMT -8