The X-Sight 4K has a 3.5-inch eye relief, and can be mounted using 30 mm mounting rings. ATN has provided two standard rings and one L shape ring (For X-Sight 4K Pro only). The L shape ring is for those instances when you need extra eye relief for certain rifles. First, choose your preference of rings and position and mount the bottom portions of your rings to your rail for optimal eye relief. Place the scope on the bottom half of the rings you just mounted, verifying you have sufficient eye relief for your platform. Place the top portion of your ring over the mounted bottom portion, make sure the holes align and the screws turn easily. Apply equal torque to all screws with the provided Allen wrench. Make sure your rings are tight on your rifles rail and will not come loose due to recoil.
For mounting the X-Sight 4K on the weaver rail:
Loosen the fixing screws on the sides of the mounting rings. Place the rifle scope on the weaver rail so that the projection of the rail, which is in the base of the ring, enters the recess in the rail. Tighten the fixing screws of the mounting rings.
CAUTION!: Be sure your weapon is not loaded. Use safe weapon handling procedures at all times.
NOTE: Please do not over tighten the Fixing Screws when attaching the rings to your rail, we recommend using 38 in-lbs.
NOTE: Rings are only included with the X-Sight 4K Pro models only.
dougman: I have some older firmwares for the x1 and x2
Nov 11, 2019 13:05:45 GMT -8
dougman: sideload program on atn firmware update sight. Download it for windows 10 and use the usb cord from scope to pc and sideload after installing the program.
Nov 11, 2019 13:36:23 GMT -8
savage308: just found this forum and will be here a lot.
Nov 11, 2019 17:45:41 GMT -8
savage308: I see some users add an ir light . why.
Nov 11, 2019 17:47:50 GMT -8
tp: Hi, I'm looking for informations. Is it necessary to make a control shout if I upload the new firmwares and reset the devices? I note before the update the currently coordinate and after update/reset I give on this coordinate in settings systems. Thanks.
Nov 16, 2019 1:31:21 GMT -8
tp: Sry for my bad English skills, I'll try again. At first I saved the current coordinates (x,y). Afterwards I updated the software and reseted the system. Then I putted the saved coordinates in again. My question is: Am I supposed to make a control shot
Nov 16, 2019 3:38:45 GMT -8
jhaberly: You do not need an ir light for thermal scopes. The X-Sight 4K sees in the ir spectrum and presents it to you as visible on the view screen.
Nov 22, 2019 12:24:15 GMT -8
rcarpen128: I have a thor 4 that has been great but now I can not get it to power on. Is there anyway to reset so will power on?
Nov 22, 2019 12:32:04 GMT -8
jhaberly: I have the 4K PRO and it made a click sound when it powered on and off. Did the Thor 4 do that as well? If so you'll know if it's turning on and off (off by holding Power for 15 seconds or more).
Nov 22, 2019 12:51:13 GMT -8
jhaberly: I downloaded the PC-based application to force a firmware re-load and that fixed it. Somehow it got wedged so it appeared that nothing was working.
Nov 22, 2019 12:51:42 GMT -8
janus: Hi , I have Binox 4k , after replacement from ATN service I have still the same problem , blind screen or does not start up or I can see thru one ocular , I’m gonna again call to ATN support but maybe someone had the same problem , thx
Nov 26, 2019 9:06:55 GMT -8
nick0962: Im trying to up date but I don't know were to go
Nov 27, 2019 18:47:45 GMT -8
tkadja: I am a new owner of a 4k 3-14; hoping to get it set up in the next couple of weeks. Living in SW Florida.
Nov 28, 2019 10:22:21 GMT -8
82andy: I have a Thor LT 3-6X and I’m having the same problem. I fired a zero shot and two more shots to confirm the zero and now I can not get it to turn on. I’ve charged it for 10 hours but to no avail. Does anyone have a remedy
Nov 28, 2019 15:46:18 GMT -8
mla: Have a lot of probems with Thor4, 1,25-5. Blue screen, freezing etc. More worse for every new firmware, now back to 3.3.05.357. Someone know if my scope with Device Serial x-x-b5sF is gen1? Someone who have firmware 3.3,01,196 and or 3.3.03.275? T.I.A//mla
Nov 30, 2019 9:09:05 GMT -8
zmantn: Has anybody been able to get the ThOR 4 app, using bluetooth to pair,to work on an Android phone? If so, what is the version of Android is the phone using?
Dec 5, 2019 18:27:18 GMT -8
sohail: i just bought a 4k 3-14 from dubai ...after using couple od days it went dark..... i can hear the on and off sounds but no visual....i found u ppl can force reset the scope through laptop... i downloaded the blue stacks and installed obsidian on my lappy
Dec 8, 2019 23:46:21 GMT -8
sohail: but cannot connect the scope via usb or reset the scope either...can u put me to right direction?... thanks
Dec 8, 2019 23:47:32 GMT -8
simon1979: done recent update on x-sight 4k, but now it doesn't support my zero profile on my sd card?
Dec 9, 2019 13:57:50 GMT -8