Yes flyingblind7 i,ve seen them but was hoping to get one in uk,i,ve had items from america before, you pay postage there then you pay postage here,ends up about 10 times the price of item!!!!!Thanks anyway. rgds stubbs4612
Hi stubbs4612, I've recently designed a snap on focus wheel that is printed by a specialist company in the Netherlands (i'm in the UK) but due to the "no selling" nature of this forum, you would have to contact me via PM for further details? Jason Jones (admin) has one on trial at the mo, so you could ask him his thoughts if you wish?
Stubbs, I have seen on this Forum where you remove the focus knob and remove excess paint build up from inside the scope housing that the knob rotates in. Some fine sand paper would do the trick. Re grease the o ring with some light weight goo and it should turn better. I had to send my 5-20X in for some Service and ATN must've done this trick to mine cause it is much better than before. Good Luck
I second this. Stuck one on my XSII HD 5~20 and it makes all the difference in the world. Single finger focus now. 3-D printers are pretty much available everywhere now. And the internet is a wonderful place.
Choose Wisely Shoot Straight
ATN X-Sight II 5~20 w/ IR 850 PRO w/ XTRAC mounted on a Ravin R-20 Crossbow
2019chevy: I am a new owner of a X-Sight 4Kpro 5x20, although reading many negative reviews. I have the scope setup on 6.5 Grendel upper and been to the range once without reading the manual. Since I've read the manual what little help that was, I'm ready now.
Aug 6, 2019 8:44:11 GMT -8
harrisonwills: hello guys can u pls let me introduce different business stuffs here which will all be glad to have me ADMINS pls
Aug 8, 2019 10:33:32 GMT -8
herb48haigh: Hello from a PI in Florida. Learning the ropes on an x scope II 5-20 for surveillance work, mounted on a tripod - not a rifle.
Aug 8, 2019 18:39:19 GMT -8
odin: Any Texas guys on here know where a kiwi can go shoot .50 338 etc at a range when visiting in a month?
Aug 10, 2019 18:49:25 GMT -8
sonora1one: Just got my 5 X 20 Pro get it mounted and glad to see this support group.
Aug 11, 2019 3:17:29 GMT -8
bob63: hello i'm new member with thor 4 1.5x5 pleased with scope up until 394 firmware . now audio has a time lag and is not in sync with video.
Aug 12, 2019 5:55:33 GMT -8
javi: Hi, I have a binox 4-16 and it has started to fail me, it consumes the batteries being turned off and when I turned it on it gave me fireware error, I updated it but it remains the same, apart there are times that I turn it on and nothing is seen.
Aug 12, 2019 10:06:12 GMT -8
frankcatsdad: Is there a for sale section on the forum, as new to nv thought this maybe a good place to get advice and buy some Atn kit...
Aug 13, 2019 3:43:08 GMT -8
Widowmaker: herb48haigh Now all you need is a remote hdmi monitor so you don't have to squint thru the eyepiece.
Aug 14, 2019 10:24:38 GMT -8
clarkey: Can anyone please assist. I have just purchased and ATN X-Sight 4K Pro 3-14X and need to mount this on my Daystate .22 Redwolf. The mounts that came with the ATN have fittings too large for my rifle rails.
Aug 16, 2019 9:11:04 GMT -8
koke915: Hi guys, good day. I have an ATN Thor 4. I installed the latest firmware version available on the ATN website, after that it started shutting down alone, I tried to reinstall other firmware without results. Someone else has happened, how did they solve it
Sept 11, 2019 3:31:43 GMT -8
dabernathy: Hi all, D Abernathy from Driftwood, TX. I have an ATN X-sight 2 3x14 & X-sight 2 5x20 and do a lot of night hog and predator hunting. I also have a Photon XT (it was given to me---and I know why...).
Sept 14, 2019 14:01:54 GMT -8