From the factory, my Sport II trigger had about 6.5 pound pull. That wasn't bad as far as I was concerned but I could feel steps in it when sighting in the new X-Sight II. I like a smooth continuous pull before the bang so the steps were not only irritating but also threw my shots. I tried oil then gun grease but it still had the jerky steps before the bang. And I wasn't about to pay $150-$200 for new after market trigger group. I'd rather spend that on ammo. A quick search on YouTube showed some simple, but critical, mods to the trigger group. Since I had been through this with the Shield 9mm a couple of months ago, I felt up to the task.
A little hand stoning to take out machine marks and some time with a Dremel and polish wheel proved to be a huge benefit. After cleaning the parts with lacquer thinner, I sprayed the contact points, pins and the disconnector with Moly spray. I also opened the spring coils so I could coat them with moly. After reassembly, trigger pull dropped to 4.5 pounds and it's smooth as silk. No more steps! Yeah! And I saved $200!
2019chevy: I am a new owner of a X-Sight 4Kpro 5x20, although reading many negative reviews. I have the scope setup on 6.5 Grendel upper and been to the range once without reading the manual. Since I've read the manual what little help that was, I'm ready now.
Aug 6, 2019 8:44:11 GMT -8
harrisonwills: hello guys can u pls let me introduce different business stuffs here which will all be glad to have me ADMINS pls
Aug 8, 2019 10:33:32 GMT -8
herb48haigh: Hello from a PI in Florida. Learning the ropes on an x scope II 5-20 for surveillance work, mounted on a tripod - not a rifle.
Aug 8, 2019 18:39:19 GMT -8
odin: Any Texas guys on here know where a kiwi can go shoot .50 338 etc at a range when visiting in a month?
Aug 10, 2019 18:49:25 GMT -8
sonora1one: Just got my 5 X 20 Pro get it mounted and glad to see this support group.
Aug 11, 2019 3:17:29 GMT -8
bob63: hello i'm new member with thor 4 1.5x5 pleased with scope up until 394 firmware . now audio has a time lag and is not in sync with video.
Aug 12, 2019 5:55:33 GMT -8
javi: Hi, I have a binox 4-16 and it has started to fail me, it consumes the batteries being turned off and when I turned it on it gave me fireware error, I updated it but it remains the same, apart there are times that I turn it on and nothing is seen.
Aug 12, 2019 10:06:12 GMT -8
frankcatsdad: Is there a for sale section on the forum, as new to nv thought this maybe a good place to get advice and buy some Atn kit...
Aug 13, 2019 3:43:08 GMT -8
Widowmaker: herb48haigh Now all you need is a remote hdmi monitor so you don't have to squint thru the eyepiece.
Aug 14, 2019 10:24:38 GMT -8
clarkey: Can anyone please assist. I have just purchased and ATN X-Sight 4K Pro 3-14X and need to mount this on my Daystate .22 Redwolf. The mounts that came with the ATN have fittings too large for my rifle rails.
Aug 16, 2019 9:11:04 GMT -8
koke915: Hi guys, good day. I have an ATN Thor 4. I installed the latest firmware version available on the ATN website, after that it started shutting down alone, I tried to reinstall other firmware without results. Someone else has happened, how did they solve it
Sept 11, 2019 3:31:43 GMT -8
dabernathy: Hi all, D Abernathy from Driftwood, TX. I have an ATN X-sight 2 3x14 & X-sight 2 5x20 and do a lot of night hog and predator hunting. I also have a Photon XT (it was given to me---and I know why...).
Sept 14, 2019 14:01:54 GMT -8